Ankmax H2UC30C
Ankmax H2U30C supports 2.5" SATA SSD and 3.5" and 2.5" SATA HDD. The capacity of a single hard drive can be up to 20TB.
ANKMAX H2U30C is a high-speed USB3.0 hard disk enclosure, which can support two hard disks to be used separately and can be used to store daily files, photos, videos and other data. Plug and play.
At the same time, it also supports the offline cloning function between 2 hard disks, and you do not need to connect a computer when using the cloning function. With a digital display of clone progress, it is very convenient to use.
5Gbps Transfer Speeds
SuperSpeed USB3.0 hard drive enclosure with data transfer rates up to 5Gbps, support UASP Protocol.
Connected to a computer, the two hard drives inserted can appear as two independent volumes that can be accessed independently. If you insert a new hard drive, you can format the hard drive first, place the files on the drive, and copy the files from the drive to your computer.
Supports use under Windows, Mac and Linux operating systems, and the inserted drive supports the boot drive of the system.
A free USB C to A adapter is provided for easier use on computers with USB C and Thunderbolt 3/4 ports.
HDD, SSD, Hard Drive Duplicator /Offline Clone Function
Offine Cloning is Fast and Easy
Cloning of SSDs and HDDs is So Easy
Support two hard disks offline cloning function.No need to connect a computer when using the clone function, you can directly clone HDD1 to HDD2 (The capacity of HDD2 must be equal or greater than that of HDD1).
Complete Clone Data
Everything including the operating system can be cloned.For example, it is used to fully clone the HDD with Windows 10 installed to the SSD. Completely clone 1TB hard disk data to 4TB hard disk to increase storage capacity, which can save a lot of time when cloning in batches.
High-speed SSD Offline Cloning
Fast Cloning Speed
HDD cloning speed can be up to 228MB/sec, 1TB HDD capacity cloning time is about 1.5 hours.
SSD cloning speed can be up to 485MB/sec, 1TB SSD only takes 30 minutes.
Test results from 2 Samsung 860 1TB SSD, 2 Seagate Ironwolf Pro 12TB HDDs.
Cloning is so easy and saves a lot of time
Easy cloning operation
It supports the offline cloning function of 2 hard disks. When using the cloning function, you do not need to connect to a computer. You can directly clone HDD1 to HDD2 (the capacity of HDD2 must be equal to or greater than that of HDD1).
Keep your data safe
Insert two drives and it will not clone automatically. Before cloning you must first disconnect the USB port from the computer, press and hold the clone button until the clone light turns on, then release and press it again to start the cloning process.
Exclusive LED Digital Display Cloning Progress
Quickly press the "Clone" button twice and the clone progress LED indicator will light up to show the progress of the clone. It is very convenient to see the progress of the clone.
If there is any abnormality before or during cloning, an EOR error message will be displayed, which is particularly intuitive and convenient.
Offline Cloning Steps
Step1
· Connect the power adapter to the back of the dock
· Insert your Source hard drive into HDD 1
· Insert your Target hard drive in HDD 2
Note: The capacity of your target HDD2 must be equal or greater when compared to your source HDD1, you can’t clone into HDD2 with less capacity.
Step2
· Press the Power Switch to ON
· You should get White LEDs on HDD 1 and HDD 2
· You should also get a White LED on the Power Indicator
Step3
· Quickly press the "Clone" button twice and the clone progress LED indicator will light up to show the progress of the clone
· The cloning progress indicator will display the cloning progress percentage very intuitively
Step4
· When cloning is complete, the LED indicator will show 100%
· Power off the dock and remove your hard drives
Better Protection
Each hard disk slot has a unique protective cover design, which can effectively prevent dust and foreign objects from falling into it, and better protect the product.
Exclusive LED Digital Display Cloning Progress
If there is any abnormality before or during cloning, an EOR error message will be displayed, which is particularly intuitive and convenient.
Support Both HDD and SSD
ANKMAX 2bay external hard drive docking station supports standard desktop 2.5 and 3.5 inch SATA hard drives and 2.5 inch SATA SSD. Supports hard drives up to 20TB.
Note:
When inserting a 2.5-inch SSD, because the thickness of the 2.5-inch SSD is thinner than that of the 3.5-inch HDD, there will be a forward tilt angle after installation. This is a normal phenomenon, no need to worry, it can be used normally.
Wild-range Compatibility
Supports multiple operating systems such as Windows, Mac, and Linux, and the inserted drive supports the boot drive of the system.
Additional 10Gbps USB C TO USB A adapter is provided, which can be conveniently used on computers with only USB C interface or Thunderbolt 3/4 interface.
High-power Power Adapter
As the startup current required by large-capacity hard disks increases, when two large-capacity hard disks are inserted and started at the same time, it may fail to start or the hard disks may run unstable due to insufficient current. At present, the 2bay hard disk base that is only equipped with a 12V 3A power adapter may encounter this problem, and in severe cases, the hard disk will be damaged.
The Ankmax H2U30C is equipped with a 12V 4A total of 48W high-current adapter, which is enough to meet the subsequent use of larger capacity hard drives, and users can use it with peace of mind.
Packing List
· Packing box
· Product
· USB C TO A adapter
· User Manual
· USB Cable
· Power Cable
· 12V 4A Power adapter
Product Quick Guide